Medical engineering requires long-term approach
Medical engineering has strong growth prospects due to the sector being much less dependent on economic cycles, even if they are not expected to reach the volume of the automotive …
Mazda Crossover’s Sales Steps Up as Top Rank in June, Achieve Top Sales of FY2020’s First Quarter Amid the Pandemic of Covid-19
Mazda achieves as best seller in crossover SUV market with the total sales of 1,200 units after it has once achieved this success in the past April. This leads Mazda to step up as …
German machine tool industry under great pressure in 1Q 2020
Orders received by the German machine tool industry in the first quarter of 2020 were 25 per cent down on the same period last year. Orders from within Germany fell by 22 per cent.…
BMW Group increases sales of electrified vehicles in first half-year, despite COVID-19
Total sales affected by the impact of the worldwide pandemic +++ Initial signs of recovery in individual markets at the end of Q2 +++ 962,575 vehicles delivered (-23.0%) in year to…
Nissan reports first-quarter results and outlook for FY2020
Nissan Motor Co., Ltd. today announced financial results for the three months ended June 30, 2020, and the outlook for fiscal year 2020.
Corona crisis holding down German machine tool industry orders
Orders received by the German machine tool industry in the second quarter of 2020 were 46 per cent down on the same period last year. In the process orders from Germany fell by 36 …
Mazda sales rise drastically in Q3. CX-30 is the most popular model
Surapong Tangtaratorn from Factory Max Unfolds 3 Survival Strategies for Thailand
Today, M Report has an in-depth discussion with Mr. Surapong Tangtaratorn to the country and business survival in difficult situations caused by COVID-19
Corona leaving deep scars on the machine tool industry
Orders received in the third quarter of 2020 were 29 per cent down on the same period last year. Orders from within Germany fell by 26 per cent. 30 percent fewer orders were receiv…
11.png)
Find a reliable and high-quality Chinese supplier in Henan Export Commodities Online Fair 2021
Henan Export Commodities Online Fair 2021 (ASEAN Station-Mechanical Equipment Fair) is a full-scale virtual exhibition, dated from 18 March to 10 April 2021.
Hitachi High-Tech further expands its high-performance metals analysis range with the new OE720
Hitachi High-Tech Analytical Science further expands its high-performance metals analysis range with the launch of the OE720, boasts the same high-performance as the OE750 but offe…
Okamoto’s fully automatic grinding system “MAP GRINDING SOFT”
MAP grinding means [Measuring highest point], [Air-cutless], and [Productivity], will automatically grinding the workpieces mounted on the machine.
Oerlikon Balzers further expands coating operations in Asia with first customer centre in Vietnam
Oerlikon Balzers, a leading provider of surface solutions for the metal and plastics processing industry, has further expanded its coating services in Asia by opening its new custo…
Corona leaving deep scars on the machine tool industry
Orders received in the third quarter of 2020 were 29 per cent down on the same period last year. Orders from within Germany fell by 26 per cent. 30 percent fewer orders were receiv…
Mazda overcame Covid-19 pandemic, delivered 19,000 cars in the first half of 2021, aimed to launch passenger cars and SUVs to the market
PC Demand Remained Strong in the Second Quarter Amid Early Signs That Market Conditions May Be Cooling, According to IDC
PC Demand Remained Strong in the Second Quarter Amid Early Signs That Market Conditions May Be Cooling, According to IDC
.jpg)
Battle Quality Challenges in Metal Casting (Thai language)
From raw material to the finished metal part, manufacturers today require precise in-process and final measurements to ensure customer requirements are met. Learn how an integrated…
DRILL-SFEED: Head Changeable 3-Flute Drill for Higher Productivity
TaeguTec has introduced the DRILL-SFEED, a new head changeable 3-flute drill with upgraded clamping structure designed to maximize productivity.
PC Demand Remained Strong in the Second Quarter Amid Early Signs That Market Conditions May Be Cooling, According to IDC
PC Demand Remained Strong in the Second Quarter Amid Early Signs That Market Conditions May Be Cooling, According to IDC
Samut Sakhon: Champion for the largest number of new factories in September 2021
Samut Sakhon was the province where 30 new factories opened, the largest number with the total capital of 590.96 million baht.
Samut Prakan: Champion for the largest number of new factories in October 2021
Samut Prakan was the province where 19 new factories opened, the largest number with the total capital of 680 million baht.
How complementary materials analysis techniques can help improve quality
Join our technical expert, So Tanaka, as he gives his recommendations to help you accelerate your material testing processes and protect your business’ reputation.
Car Production in November 2021 totaled 163,353 units, expected to “reach over 1.6 million for the whole year”
The November production reached the highest point in 12 months at 163,353 units, decreased 4.12% (YoY). The production number for 11 months of this year totaled 1,531,337 units, ri…
Samut Sakhon: Champion for the largest number of new factories in November 2021
Samut Sakhon was the province where 33 new factories opened, the largest number with the total capital of 1,380 million baht.
Mazda reveals that its sales performance in 2021 was over 35,000 units or accounted for 5% market share.
Mazda’s CX-Series sales increased 21%, prepares 4 new models to enter the market in the first quarter of this year.
Car Production in December 2021 totaled 154,368 units. Total year 1.68 million units.
The December production reached at 154,368 units, decreased 4.12% (YoY). The production number of this year totaled 1,685,705 units, rising 18.12%.
Rayong: Champion for the largest number of new factories in December 2021
Rayong was the province where 13 new factories opened, the largest number with the total capital of 584 million baht.
Thailand Car Production in January 2022 totaled 151,747 units. Export downed 58% due to Chip Shortage.
The January production reached at 151,747 units, increased 2.45% (YoY) but decreased 1.70% from December 2021 as 154,368 units.
Chonburi - Chachoengsao: Champions for the largest number of new factories in January 2022
New factories were licensed in January 2022, totaled 162 factories, in which Chonburi and Chachoengsao were the largest numbers at the same 13 new factories opened.
SODICK Joins METALEX March Machinery Technology The First Industrial Event of 2022
In the event you will find Sodick Linear Motor drive Milling Center TS50L/ Die-Sinker EDM AL40G/ and Wire-cut EDM ALN400G – Igroove. Meet us at Metalex March Between 9-12 March 202…
Car Production in February 2022 totaled 155,660 units. One-ton Pickup Increased both Domestic and Export
The February production reached at 155,660 units, increased 0.30% (YoY). The production number of this year totaled 307,407 units, rising 1.35%.
Samut Sakhon: Champions for the largest number of new factories in February 2022
Samut Sakhon was the province where 11 new factories opened, the largest number with the total capital of 373 million baht.
Car Production in March 2022 totaled 172,671 units.
The March production reached at 172,671 units, increased 6.25% (YoY). The production number of this year totaled 480,078 units, rising 3.06%.
Chonburi: Champions for the largest number of new factories in March 2022
Chonburi was the province where 26 new factories opened, the largest number with the total capital of 1,894 million baht.
Car Production in April 2022 totaled 117,786 units.
The April production reached at 117,786 units, increased 12.87% (YoY). The production number of this year totaled 597,864 units, rising 4.85%.
Hitachi High-Tech sets a new pace for plating and coatings analysis with the new FT230
The new FT230 is designed to enable quality control to keep pace with production by significantly simplifying and accelerating testing of components and assemblies.
Double Column Grinding Machine ACC-CH-iQ Series from Okamoto
The ACC-CH-iQ Series satisfies the demands for high accuracy required for machining the progressive dies used for motor cores or LC processing, while also offering the high efficie…
Chonburi: Champions for the largest number of new factories in April 2022
Chonburi was the province where 17 new factories opened, the largest number with the total capital of 937.89 million baht.
YG-1 released YG401, PVD Turning Insert for HRSA
YG401 is a new PVD Turning Grade designed with exception machining performance in Heat Resistance Superalloys (HRSA)
TAKAMAZ PRIVATE SHOW 2022 underlines machinery demands in automotive industry
The TAKAMAZ PRIVATE SHOW 2022 underlines the machinery demands in the automotive industry.
Car Production in May 2022 totaled 129,231 units.
The May production reached at 129,231 units, decreased 7.80% (YoY). The production number of this year totaled 727,095 units, rising 2.36%.
Samut Sakhon: Champions for the largest number of new factories in May 2022
Samut Sakhon was the province where 20 new factories opened, the largest number with the total capital of 1,087.11 million baht.
Car Production in June 2022 totaled 143,016 units.
The May production reached at 143,016 units, increased 6.53% (YoY). The production number of this year totaled 870,109 units, rising 3.02%.
Oerlikon Balzers launches highly abrasion and corrosion resistant coating for injection moulding and extrusion of filled polymers
Oerlikon Balzers has introduced BALINIT MOLDENA for injection moulding and extrusion of filled polymers provides superior abrasion and corrosion resistance for applications with gl…
Samut Sakhon: Champions for the largest number of new factories in June 2022
Samut Sakhon was the province where 23 new factories opened, the largest number with the total capital of 440.09 million baht.
Car Production in July 2022 totaled 142,958 units
The July production reached at 142,958 units, increased 16.07% (YoY). The production number of this year totaled 1,013,069 units, rising 4.68%.
Iscar's NEOSWISS - A New Modular Quick Change Head System for Swiss-Type Machines
Iscar's NEOSWISS - A New Modular Quick Change Head System for Swiss-Type Machines Intended for Turning, Grooving, Parting, and Threading Applications.
HURCO “BX40Ui” 5-Axis Double Column High Speed Machining Center
The Hurco BX40Ui CNC double-column machining center, with trunnion table mounted along the Y-axis, is the perfect combination of performance and flexibility.
Samut Prakan: Champions for the largest number of new factories in July 2022
Samut Prakan was the province where 15 new factories opened, the largest number with the total capital of 1,041.96 million baht.
Urgent application to join THAI-JAPAN TRADE MISSION 2022 in Japan, dated 6-11 November
Thai Subcontracting Promotion Association in corporation with M Report Online News cordially invite Thai entrepreneurs to participate in factory visits and business matching activi…